قابلیت جدید اتوکد ۲۰۱۷ | Drafting and Annotation Enhancements

قابلیت جدید اتوکد ۲۰۱۷

با سلام یک مقالهدر موردقابلیت جدید اتوکد ۲۰۱۷ به زبان اصلی براتون قرار دادم که یک سری دیگر از قابلیت های جدید اتوکد ۲۰۱۷ در آن بررسی شده

این مقاله به زبان انگلیسی هست ولی متن آن بسیار روان است و کسانی که کمی به انگلیسی مسلط باشن به راحتی میتونن متوجه آن بشن

ولی برای دوستانی که در ترجمه ی این متن مشکل دارن هم میگیم که به زودی ترجمه ی فارسی مقاله هم براتون قرار میدیم تا استفاده کنید.

مقاله های از این دست برای علاقمندان و مهندسان عزیز بسیار مفید هستند چرا که نکات روز دنیای اتوکد را در اختیار کاربران قرار می دهند .

امیدوارم لذت ببرید


Associative Centerlines and Center Marks

AutoCAD 2017 has new centerlines tools. You can create center marks and centerlines easily with these tools. You can find the tools in Annotate tab> Centerlines panel.

centerlines tools

Using these tools are pretty straight forward. Just select a circle or arc to create a center mark. And pick two lines to create a centerline.

However, there are a bunch of new system variable to control the behavior and appearance. If you are not

If you are not familiar with changing system variable on the command line, type the command and press enter.

CENTERREASSOCIATE and CENTERDISASSOCIATE

The symbols are linked to the object. They will follow the object size when you modify it. If you don’t want this behavior, you can disassociate it. Use CENTERDISASSOCIATE command. And if you want to reassociate it, CENTERREASSOCIATE will link the object with the centerline symbol again.

خواندن مطلب
فیلم آموزش اتوکد - جلسه ی چهارم

CENTEREXE

This variable controls the extension length of the centerlines.

centerexe variable

Note: Changing these variables only affects newly created objects. Existing objects will not be affected. You need to use CENTERRESET to apply the changes to existing objects. More about this later.

CENTERMARKEXE

This variable is to turn on/off the extension line. If you turn it off, only the center mark is created.

centermark without extension

CENTERLAYER

You can choose on which layer the center mark will be created. The center mark tool will use the layer that you define here.

CENTERLTYPE

This variable is to define what line type the center mark use.

CENTERLTSCALE

Center marks follow the drawing line type scale. However, if you want to set a different value you can change it here.

CENTERCROSSSIZE

Yes, this variable has 3 S’s. Aren’t you happy we have AutoComplete now? This variable controls the cross size of the center marks as shown below.

centercross size

CENTERCROSSGAP

This variable controls the distance between the center mark and the extension line.

CENTERRESET

When you change the CENTEREXE value, it only affects new objects. It will not affect existing objects. CENTERRESET will force the existing objects to use the new value.

However, note that this only affects CENTEREXE variable. For other variables, you need to delete and recreate the center marks. I expect that this command can work with other variables too in the future.

This new tool is pretty useful, but I don’t see the reason why Autodesk didn’t make a dialog box to change the variables. It would be easier to change them all. A CENTERSTYLE command perhaps? Like we can modify the dimension styles?

Dimension and Hatch Layer

In AutoCAD 2016, we can set a dimension layer with DIMLAYER command. Every time we create a dimension with DIM command, it will be created in the defined layer. However, it only works for DIM command. It doesn’t work with Linear Dimension, Angular Dimension, and the others dimension tools.

خواندن مطلب
فیلم آموزش اتوکد 3 بعدی – جلسه نهم

In AutoCAD 2017, you can use it for other dimension tools. But not the QDIM command. I’m not sure, but it seems the developer forget about this tool.

HPLAYER command is not new. In AutoCAD 2017, you can set HPLAYER to non-existing layer and AutoCAD will create the new dimension for you.

US Survey Feet Unit

US Survey Feet unit is now added in the UNITS and INSUNIT command.

us survey feet

To Sum Up

The dimension layer fix in this release is pretty useful. The center mark tools are pretty nice, especially if you draw them on a regular basis. However, it looks not finished yet. A center mark style (or at least a dialog box) to change the variable will be excellent. And don’t forget about updating the existing center mark to the new values. CENTERRESET should work on all of them.

علی رهبر هستم | کارشناس ارشد در رشته عمران و گرایش ژئوتکنیک و تخصص در زمینه مدلسازی سه بعدی، طراحی سازه و ترسیم نقشه سازه، تخصص در طراحی معماری و نما و تخصص در زمینه point cloud و تهیه حجم و نقشه از سازه های خاص. مدرس نرم افزار های اتوکد، رویت ارشیتکت، رویت استراکچر، ژئو استودیو،

عضویت

مقاله های مرتبط :

دوره های آموزشی مرتبط :

دیدگاه خود را بیان کنید :

نشانی ایمیل شما منتشر نخواهد شد.